BRAZING CLIP ASSEMBLY MACHINE USING PLC (SPECIAL PURPOSE MACHINE)-EEE Final year Project

ABSTRACT      

It is special purpose machine by using Allen Bradley plc. This is used to manufacture the clip, which is used in starter of four wheelers. The purpose of the clip is to join the copper winding and commutator In inside the starter.

For this machine we designed electrical panel board by using plc, relay board, smps, mcb, transformer, pneumatic cylinder, solenoid coils, pushbutton etc…

This machine consists of four pneumatic cylinders. They are Top cylinder, Bottom cylinder, Hold cylinder, Feeder cylinder. The bottom cylinder has three proximity sensors i) Top cylinder top sensor, ii) Top cylinder middle sensor, iii) … Read the rest

RAILWAY TRACK TRACER

INTRODUCTION

In history of railways , almost 90% of the accidents happens because of two reasons:

  • Train comes away from track
  • Track discontinuity

TRAIN COMES AWAY FROM TRACK

It means that track is not all problems but train moves out of track. This happens because Of lack of concentration of the people who works with track.  For example when the nuts and bolts get loosed these sorts of problems will occur, where property loss will happen to both public and railways but not that much as the second case.  

TRACK DISCONTINUITY

i) This happens because of terrorism attack, natural disaster. … Read the rest

TOUCH ME NOT – For Playing Games-ECE Project

ABSTRACT

Everyone likes to enjoy their free time in a more effective way. It would be more interesting and joyful if we spend the time in playing games, solving puzzles etc. Touch me not is an interesting project that allows the user to upgrade his concentration and a relief providing game.

This project is mainly designed as Events to be conducted at Exhibitions, Fetes etc. This project seems to be easy but it includes different interfacings with the microcontroller. This project uses 89C51 microcontroller. Seven segment displays are provided in this project for the display of various parameters like chances, … Read the rest

TRANSFORMER PROTECTION USING NUMERICAL RELAY

INTRODUCTION

The aim of this project is to analyze and upgrade existing transformer protection system in BPCL Kochi Refinery. Transformers are static devices totally enclosed and generally oil immersed. Therefore, chances of faults occurring on them are very rare.” However the consequences of even a rare fault may be very serious unless the transformer is quickly disconnected from the system. This necessitates providing adequate automatic protection for transformer against possible faults.

Small distribution transformers are usually connected to the supply system through series fuses instead of circuit breakers. Consequently, no automatic protective relay equipment is required. However, the probability of … Read the rest

Robotics & Mechatronics Automation Based Projects List-Mechanical Engineering-Electronics engineering-Electrical Engineering

Robotics / Mechatronics / Automation Based Project List

  1. Fabrication of blow air material separator
  2. Fabrication of device for demonstration of magnetic levitation and launching
  3. Fabrication of linear motor
  4. Fabrication of motorized tricycle for children
  5. Fabrication of catapult for play war arena
  6. Fabrication of remote controlled robotic arms for medical operation purpose
  7. Fabrication of car bike combo
  8. Fabrication of artificial fore limb for writing purpose
  9. Fabrication of play ball collecting robot
  10. Fabrication of robot war machine
  11. Fabrication of worm robot
  12. Fabrication of adaptive ground clearance vehicle
  13. Fabrication of conceptual solar vehicle
  14. Fabrication of motorized focus light mechanism for all directions
  15. Fabrication
Read the rest