TYRE COUPLING

DESIGN AND FABRICATION OF TYRE COUPLING

ABSTRACT

Mild steel or wrought iron shaft are available in lengths varying from 6 to 10 meters, so as to make them handy and easy to transport. More lengthy shafts cannot be manufactured in a correct form to be used for power transmission. In engineering practice shafts of large lengths are required to transmit the torque which can be obtained by joining two or more shafts in order to obtain the required length. The joining of shafts is done by device is called as coupling.

Tyre coupling is used to connect two shafts which are parallel & and it will make up the Miss alignment and withstand the backlash. HIGH MISALIGNMENT TOLERANCE of one degree per end can be tolerated without damage to the drive shaft or connected equipment bearings. Tyre coupling are made from high strength composite materials. It is mainly used in the Automobile Dry Shaft power Transmission

REQUIREMENTS OF A GOODSHAFT COUPLING:

1. It should be easy to connect or disconnect.

2. It should transmit the full power from one shaft to other   shaft without losses.

3. It should hold the shafts in perfect alignment.

4. It should reduce the transmission of shock loads from one shaft to another shaft.

TYRE COUPLING

7 thoughts on “DESIGN AND FABRICATION OF TYRE COUPLING

  1. may be a complete steps in the design and fabrication of Tyre coupling will be necessary please

  2. sir, i have selected this as my final year project title.it is my request from you to please send me the necessary details regarding this.

  3. please send me the amount of this project.

  4. plz can u send more information about this project

  5. can send more about dis project dis mill be my project for final fear

  6. ca u send me project details

  7. plz send about the tyre coupling ppt to mini project… send the titles with clear explanation

Leave a Reply

Name *
Email *
Website