DESIGN AND FABRICATION OF MULTI PURPOSE HYDRAULIC ANGLE FORMING MACHINE

SYNOPSIS

A hydraulic fluid power system is defined as a means of power transmission   in which relatively incompressible fluid is used as the power transmitting media. The primary purpose of hydraulic system is the transfer of energy from one location to another location and this energy into useful work.

In this project fabricated model of Multipurpose Hydraulic angle forming machine will describe the working principles as well as hydraulic machines application and its advantages. Metal forming can be defined as a process in which the desired and shape are obtained through the deformation of metals plastically under the action of externally applied force. The type of drive depends upon the length of the stroke needed and loaded on the ram. In this project we have selected applied to the hydraulic force for the angle forming machine.

The Hydraulic drive is used when a very heavy pressures is required on the ram this is used for drawing and forming operation .System pressure can be generated in the form of any physical action which result a compression over the Hydraulic system.

Our project has the following objectives

  1. The process uses low- cost energy source
  2. Large machines frames are not required on the process
  3. Intricate shapes on material of low form ability can be worked fairly easily.

With these features, we sincerely hope that our project serve as a valuable project. We welcome the correction, comments based on our project.

 

 

3 thoughts on “DESIGN AND FABRICATION OF MULTI PURPOSE HYDRAULIC ANGLE FORMING MACHINE

  1. can i get more information on this machine

  2. please give info about hydraulic angle forming machine

  3. please send me more information about the project. for this i will be thankfull to you.

Leave a Reply

Name *
Email *
Website